View AT102TN03-V9_4088065.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the copyright belongs to innolux. any unauthorized use is prohibited. inno l u x display corporation lcd module s p e c i f i c at i o n customer: model name: at102tn03 v.9 spec no.: a102-03-tt-91 date: 2009/08/17 version: 01 preliminary specification final specification for customer s acceptance approved by comment approved by review ed by prepared by joe lin 2009/08/19 james yu jack huang 2 0 0 9/ 0 8/ 1 9 david lee 2009/08/18 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux t he copyright belongs to innolux. any unauthorized use is prohibited. innolux copyright 2004 all rights reserved, copying forbidden. record of revision version revise date page content pre-spec 01 2009/03/26 initial release final-spec01 2009/08/17 the first final specification 1 add lcm weight http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux the copyright belongs to innolux. any unauthorized use is prohibited. contents: 1. general specifications ............................................................................................................ 1 2. pin assignment....................................................................................................................... 2 2.1. tft lcd panel driving section...................................................................................... 2 2.2. backlight unit section..................................................................................................... 5 3. operation specifications .......................................................................................................... 6 3.1. absolute maximum rating ............................................................................................... 6 3.1.1 typical operation conditions.................................................................................. 7 3.1.2 current consumption ............................................................................................. 8 3.1.3 backlight driving conditions ................................................................................... 8 3.2 power sequence ............................................................................................................ 9 3.3 timing characteristics .................................................................................................. 10 3.3.1 timing conditions ................................................................................................. 10 3.3.2 timing diagram .................................................................................................... 11 4. optical specifications............................................................................................................ 18 5. reliability test items ............................................................................................................. 22 6. general precautions ............................................................................................................. 23 6.1 safety ........................................................................................................................... 23 6.2 handling ....................................................................................................................... 23 6.3 static electricity ............................................................................................................ 23 6.4 storage ......................................................................................................................... 23 6.5 cleaning ....................................................................................................................... 23 7 mechanical drawing ............................................................................................................. 24 8 package drawing ................................................................................................................. 25 8.1 packaging material table.............................................................................................. 25 8.2 packaging quantity ...................................................................................................... 25 8.3 packaging drawing....................................................................................................... 26 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 1/26 the copyright belongs to innolux. any unauthorized use is prohibited. 1. general specifications no. item specification remark 1 lcd size 10.2 inch(diagonal) 2 driver element a-si tft active matrix 3 resolution 800 3(rgb) 480 4 display mode normally white, transmissive 5 dot pitch 0.0925(w) 0.276(h) mm 6 active area 222.0(w) 132.48(h) mm 7 module size 235.0(w) 145.8(h) 6.1(d) mm note 1 8 surface treatment anti-glare 9 color arrangement rgb-stripe 10 interface digital 11 backlight power consumption 1.86w(typ.) 12 panel power consumption 0.25w(typ.) 13 weight 325g(typ) note 1: refer to mechanical drawing. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 2/26 the copyright belongs to innolux. any unauthorized use is prohibited. 2. pin assignment 2.1. tft lcd panel driving section fpc connector is used for the module electronics interface. the recommended model is af 730l-a2g1t manufactured by p-two. pin no. symbol i/o function remark 1 pol i polarity selection 2 stvd i/o vertical start pulse input when u/d= h note 1 3 oev i output enable 4 ckv i vertical clock 5 stvu i/o vertical start pulse input when u/d= l note 1 6 gnd p power ground 7 edgsl i select rising edge or rising/falling edge 8 v cc p power supply for digital circuit 9 v9 i gamma voltage level 9 10 v gl p gate off voltage 11 v2 i gamma voltage level 2 12 v gh p gate on voltage 13 v6 i gamma voltage level 6 14 u/d i up/down selection note 1,2 15 v com i common voltage 16 gnd p power ground 17 av dd p power supply for analog circuit 18 v14 i gamma voltage level 14 19 v11 i gamma voltage level 11 20 v8 i gamma voltage level 8 21 v5 i gamma voltage level 5 22 v3 i gamma voltage level 3 23 gnd p power ground 24 r5 i red data(msb) 25 r4 i red data 26 r3 i red data 27 r2 i red data http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 3/26 the copyright belongs to innolux. any unauthorized use is prohibited. 28 r1 i red data 29 r0 i red data(lsb) 30 gnd p power ground 31 gnd p power ground 32 g5 i green data(msb) 33 g4 i green data 34 g3 i green data 35 g2 i green data 36 g1 i green data 37 g0 i green data(lsb) 38 sthl i/o horizontal start pulse input when r/l = l note 1 39 rev p control signal are inverted or not note 3 40 gnd i power ground 41 dclk i sample clock 42 v cc p power supply for digital circuit 43 sthr i/o horizontal start pulse input when r/l = h note 1 44 ld i latches the polarity of outputs and switches the new data to outputs 45 b5 i blue data (msb) 46 b4 i blue data 47 b3 i blue data 48 b2 i blue data 49 b1 i blue data 50 b0 i blue data (lsb) 51 r/l i right/ left selection note 1,2 52 v1 i gamma voltage level 1 53 v4 i gamma voltage level 4 54 v7 i gamma voltage level 7 55 v10 i gamma voltage level 10 56 v12 i gamma voltage level 12 57 v13 i gamma voltage level 13 58 av dd p voltage for analog circuit 59 gnd p power ground 60 v com i common voltage http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 4/26 the copyright belongs to innolux. any unauthorized use is prohibited. i: input, o: output, p: power note 1: selection of scanning mode setting of scan control input in/out state for start pulse u/d r/l stvd stvu sthr sthl scanning direction gnd v cc o i i o up to down, left to right v cc gnd i o o i down to up, right to left gnd gnd o i o i up to down, right to left v cc v cc i o i o down to up, left to right note 2: definition of scanning direction. refer to the figure as below: note 3: when rev=l , normally rev=h, these data will be inverted. up right left bottom http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 5/26 the copyright belongs to innolux. any unauthorized use is prohibited. 2.2. backlight unit section led light bar connector is used for the the integral backlight system. the recommended model is bhsr-02vs-1 manufactured by jst. pin no. symbol i/o function remark 1 v led+ p power for led backlight anode pink 2 v led- p power for led backlight cathode black http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 6/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3. operation specifications 3.1. absolute maximum rating (note 2) values item symbol min. max. unit remark v cc -0.3 5 v av dd -0.5 12 v v gh -0.3 18 v v gl -15 0.3 v power voltage v gh -v gl - 33 v v1~v7 0.4 av dd av dd -0.1 v note 1 input signal voltage v8~v14 -0.3 0.6av dd v operation temperature t op -30 85 storage temperature t st -30 85 led reverse voltage vr - 1.2 v each led note 3 led forward current i f - 25 ma each led note 1: av dd - 0.1 oy v1 oy v2 oy v3 oy v4 oy v5 oy v6 oy v7 oy v8 oy v9 oy v10>v11 oy v12 oyi v13 oy v14 oy avss + 0.1 note 2: the absolute maximum rating values of the module should not be exceeded. once exceeded absolute maximum rating values, the characteristics of the module may not be recovered. even in an extreme condition, may result in module permanently destroyed. note 3: vr conditions: zener diode 20ma. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 7/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3.1.1 typical operation conditions ( note 1) values item symbol min. typ. max. unit remark v cc 3.0 3.3 3.6 v av dd 9.0 9.2 9.4 v v gh 14.3 15.0 15.7 v power voltage v gl -10.5 -10.0 -9.5 v v com 3.6 3.8 4.0 v (v1+v14)/2 =4.9v v1~v7 0.4 av dd - av d d -0.1 v input signal voltage v8~v14 0.1 - 0.6 a v dd v input logic high voltage v ih 0.7v cc - v cc v input logic low voltage v il 0 - 0.3v cc v note 1: be sure to apply gnd, v cc , and v gl , to the lcd first, and then apply v gh . http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 8/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3.1.2 current consumption values item symbol min. typ. max. unit remark i gh - 0.3 0.5 ma v gh =15v i gl - 0.2 1.0 ma v gl = -10v i cc - 4 10 ma v cc =3.3v current for driver iav dd - 25 50 ma av dd =9.2v 3.1.3 backlight driving conditions values item symbol min. typ. max. unit remark led forward voltage v l 8.4 9.3 10.5 v note 1 led forward current i l 180 200 220 ma led life time - 20,000 - - hr note 2 note 1: the led supply voltage is defined by the numb er of led at ta=25 and i l =200ma. note 2: the led life time is defined as the module brightness decrease to 50% original brightness at ta=25 and i l =200ma. the led lifetime could be decreased if operating i l is larger than 200 ma. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 9/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3.2 power sequence 3.2.1 power on: vgh b/l avdd vcc data gnd vgl t t=0 20ms 10ms 5ms 10ms 3.2.2 power off: vgh b/l avdd vcc data gnd vgl t t=0 20ms 10ms 5ms 10ms note: data includes pol, stvd, oev, ckv, stvu, edgsl, sthl, rev, dclk, sthr, ld. vcc vgl avdd vgh data b/l b/l data vgh vadd vgl vcc http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 10/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3.3 timing characteristics 3.3.1 timing conditions values item symbol min. typ. max. unit remark dclk frequency f dclk - 40 45 mhz dclk cycle t cph 22 25 - ns dclk pulse width t cw 8 - - ns data set-up time t su 4 - - ns data hold time t hd 2 - - ns time that the last data to ld t ld 1 - - tcph pulse width of ld t wld 2 - - tcph time that ld to sthl/r t lds 5 - - tcph pol set-up time t psu 6 - - ns pol hold time t phd 6 - - ns ckv frequency f vclk - - 200 khz ckv rise time t rck - - 100 ns ckv falling time t fck - - 100 ns ckv pulse width p wclk 500 - - ns horizontal display timing range t dh - 800 - tcph horizontal timing range t h - 1056 - tcph stvu/d setup time t suv 200 - - ns stvu/d hold time t hdv 300 - - ns stvu/d delay time t dt - - 500 ns driver output delay time t do - - 900 ns output rise time t tlh - 500 1000 ns output falling time t thl - 400 800 ns oev pulse width t wcl 1 - - us oev to driver output delay time t oe - - 900 ns horizontal lines per field t v 512 525 610 line vertical display timing range t vd - 480 - line http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 11/26 the copyright belongs to innolux. any unauthorized use is prohibited. 3.3.2 timing diagram fig.3-1 operation model 1 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 12/26 the copyright belongs to innolux. any unauthorized use is prohibited. tsu thd tcw tcw tsu thd first data second data last data tsu thd tphl tphl 70% 30% 70% 30% 30% 70% 30% 70% 30% 30% 70% 70% 70% 70% 70% 70% 800 799 2 1 dclk sthl/r (input) data rgb sthr/l (output) < edgsl ="1"> fig.3-2 operation model 2 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 13/26 the copyright belongs to innolux. any unauthorized use is prohibited. dclk ld sthl/r (input) ld pol odd outputs even outputs 70% l ast tld 70% twld 70% tlds 70% 70% 70% 70% 30% 70% 30% tpsu tphd tpsutphd high-z tst 10% 90% high-z tst 90% 10% 70% tpsu tphd high-z tst positive 70% 30% negative timing diagram 2 fig.3-3 horizontal timing 1 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 14/26 the copyright belongs to innolux. any unauthorized use is prohibited. hs dclk rgb 1 2 3 8 00799798 de tdh th fig.3-4 horizontal timing 2 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 15/26 the copyright belongs to innolux. any unauthorized use is prohibited. fig.3-5 vertical shift clock timing http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 16/26 the copyright belongs to innolux. any unauthorized use is prohibited. fig.3-6 vertical timing (from up to down) http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 17/26 the copyright belongs to innolux. any unauthorized use is prohibited. rgb 1 2 3 480479478 de vs tvd tv fig.3 - 7 vertical timing http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 18/26 the copyright belongs to innolux. any unauthorized use is prohibited. 4. optical specifications values item symbol condition min. typ. max. unit remark l =180(9 oclock) 55 65 - r =0(3 oclock) 55 65 - t =90(12 oclock) 35 45 - viewing angle (cr10) b =270(6 oclock) 55 65 - degree note 1 t on - 15 30 msec note 3 response time t off - 20 40 msec note 3 contrast ratio cr 250 300 - - note 4 w x 0.26 0.31 0.36 - color chromaticity w y 0.28 0.33 0.38 - note 5 note 6 luminance l 200 250 - cd/m 2 note 6 luminance uniformity y u normal ==0 70 75 - - note 7 test conditions: 1 . v cc =3.3v, i l =200ma (backlight current), the ambient temperature is 25 . oh 2. the test systems refer to note 2. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 19/26 the copyright belongs to innolux. any unauthorized use is prohibited. note 1: definition of viewing angle range fig. 4-1 definition of viewing angle note 2: definition of optical measurement system. the optical characteristics should be measured in dark room. after 30 minutes operation, the optical properties are measured at the center point of the lcd screen. (response time is measured by photo detector topcon bm-7, other items are measured by bm-5a/field of view: 1 /height: 500mm.) fig. 4-2 optical measurement system setup normal line ==0 photo detector =90 12 oclock direction =270 6 oclock direction =0 =180 active area 500mm lcd panel =90 12 oclock direction normal line ==0 l t r b =180 =0 active area =270 6 oclock direction http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 20/26 the copyright belongs to innolux. any unauthorized use is prohibited. note 3: definition of response time the response time is defined as the lcd optical switching time interval between white state and black state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. fig. 4-3 definition of response time note 4: definition of contrast ratio state black"" the on lcd when measured luminance state white"" the on lcd when measured luminance (cr) ratio contrast = note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: all input terminals lcd panel must be ground when measuring the center area of the panel. the led driving condition is i l =200ma. 100% 90% 10% 0% photo detector output (relative value) t on t off white (tft off) black (tft on) white (tft off) http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 21/26 the copyright belongs to innolux. any unauthorized use is prohibited. note 7: definition of luminance uniformity active area is divided into 9 measuring areas (refer to fig. 4-4 ).every measuring point is placed at the center of each measuring area. max min b b (yu) uniformity luminance = l-------active area length w----- active area width w w/3 w/3 w/6 l/3 l/3 l/6 l fig. 4-4 definition of measuring points b max : the measured maximum luminance of all measurement position. b min : the measured minimum luminance of all measurement position. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 22/26 the copyright belongs to innolux. any unauthorized use is prohibited. 5. reliability test items (note3) item test conditions remark high temperature storage ta = 85 240 hrs note 1,note 4 low temperature storage ta = -30 240hrs note 1,note 4 high temperature operation ts = 85 240hrs note 2,note 4 low temperature operation ta = -30 240hrs note 1,note 4 operate at high temperature and humidity +60 , 90%rh 240 hrs note 4 thermal shock -30 /30 min ~ +85 /30 min for a total 100 cycles, start with cold temperature and end with high temperature note 4 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x. y. z. (6 hours for total) mechanical shock 100g 6ms,x, y, z 3 times for each direction package vibration test random vibration : 0.015g*g/hz from 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x. y. z. (6 hours for total) package drop test height:60 cm 1 corner, 3 edges, 6 surfaces electro static discharge 2kv, human body mode, 100pf/1500? note 1: ta is the ambient temperature of samples. note 2: ts is the temperature of panels surface. note 3: in the standard condition, there shall be no practical problem that may affect the display function. after the reliability test, the product only guarantees operation, but doesn't guarantee all the cosmetic specification. note 4: before cosmetic and function tests, the product must have enough recovery time, at least 2 hours at room temperature. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 23/26 the copyright belongs to innolux. any unauthorized use is prohibited. 6. general precautions 6.1 safety liquid crystal is poisonous. do not put it in your mouth. if liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 6.2 handling 1. the lcd panel is plate glass. do not subject the panel to mechanical shock or to excessive force on its surface. 2. the polarizer attached to the display is easily damaged. please handle it carefully to avoid scratch or other damages. 3. to avoid contamination on the display surface, do not touch the module surface with bare hands. 4. keep a space so that the lcd panels do not touch other components. 5. put cover board such as acrylic board on the surface of lcd panel to protect panel from damages. 6. transparent electrodes may be disconnected if you use the lcd panel under environmental conditions where the condensation of dew occurs. 7. do not leave module in direct sunlight to avoid malfunction of the ics. 6.3 static electricity 1. be sure to ground module before turning on power or operating module. 2. do not apply voltage which exceeds the absolute maximum rating value. 6.4 storage 1. store the module in a dark room where must keep at +2510 and 65%rh or less. 2. do not store the module in surroundings containing organic solvent or corrosive gas. 3. store the module in an anti-electrostatic container or bag. 6.5 cleaning 1. do not wipe the polarizer with dry cloth. it might cause scratch. 2. only use a soft sloth with ipa to wipe the polarizer, other chemicals might permanent damage to the polarizer. http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 24/26 the copyright belongs to innolux. any unauthorized use is prohibited. 7 mechanical drawing http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 25/26 the copyright belongs to innolux. any unauthorized use is prohibited. 8 package drawing 8.1 packaging material table no item model (material) dimensions (mm) unit weight (kg) quantity remark 1 lcm module at102tn03 v.9 235 145.8 6.1 0.325 25pcs 2 partition bc corrugated paper 512 349 226 1.154 1 set 3 corrugated bar b corrugated paper 512 370 7 0.220 2 pcs 4 dust-proof bag pe 900 700 0.05 0.010 1 pcs 5 a/s bag pe 256 203 0.07 0.010 25 pcs 10 9 10 11 ?/sq 6 carton corrugated paper 530 355 255 0.810 1 pcs 7 total weight 10.789 5 % 8.2 packaging quantity total lcm quantity in carton: no. of partition 1 rows x quantity per row 25 = 25 http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/
i nno lux spec no.: a102-03-tt-91 date :2009/08/17 page: 26/26 the copyright belongs to innolux. any unauthorized use is prohibited. 8.3 packaging drawing http://www.bdtic.com/innolux www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of AT102TN03-V9

	To Download AT102TN03-V9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .